Fiber Bragg Grating (FBG) Donatı Gerinim Ölçer - FBG Donatı Çekme Kuvveti Ölçer

Fiber Bragg Grating Donatı Gerinim Ölçerin Prensibi:

OFSCN® Micro Fiber Bragg Grating Rebar Strain Gauge is an application of DCYS's FBG strain sensors. The strain of the rebar reflects its deformation ve length changes, indirectly indicating the stress ve tension experienced by the rebar, given the known elastic modulus of the rebar.

FBG Donatı Gerinim Ölçerin Yapısı ve Sistem Kompozisyonu:

OFSCN® Micro FBG Rebar Strain Gauge consists of fiber connectors, all-metal stainless steel seamless tubes/polymer elastic materials, ve FBG encapsulation. When combined with a fiber Bragg grating demodulator, it forms a FBG rebar sensing detection system.

FBG Donatı Gerinim Ölçerin Kurulum Yöntemleri:

OFSCN® Micro FBG Rebar Strain Gauge can be directly fixed ve installed with clamps on both ends, welded, bundled, or directly installed on the surface of the rebar... In certain special applications, specially designed fixtures can be used to assist in the deployment of smart rebar gauges.

FBG Donatı Gerinim Ölçerin Çalışma Ortamı ve Uygulama Endüstrileri:

OFSCN® Micro FBG Displacement Sensor is commonly used in various pre-use inspections of rebars of different sizes, such as φ12, 16, 18, 20, 22, 25, 28, 32, 36, ve 40mm rebars. It can also be used for real-time online monitoring during the use of rebars of various sizes.

Uygulamaları, günlük yaşamda donatı kullanan tüm endüstrileri kapsar; örneğin barajlar, köprüler, tüneller, bina yüzeyleri ve iç mekanları, betonarme yüzeyler ve iç mekanlar, karayolu tabanları, tüneller ve daha fazlası.

FBG Donatı Gerinim Ölçerin Ölçüm Aralığı ve Ürün Detayları (örnek olarak 1 metrelik sensör kullanılarak):

-2000με ila +2000με ürün (2mm deformasyon): FBG Gerinim Sensörü - FBG Gerinim Ölçer

-10000με ila +10000με ürün (10mm deformasyon): Yüksek Aralık FBG Gerinim Sensörü - FBG Gerinim Ölçer

-30000με ila +30000με ürün (30mm deformasyon): Yüksek Aralık FBG Gerinim Sensörü - FBG Gerinim Ölçer - 30000με Metal koruma aralığı

%1 ila %30 deformasyon ürünü (10 ila 300mm deformasyon): Ultra Yüksek Aralık FBG Gerinim Sensörü - FBG Gerinim Ölçer

FBG Donatı Gerinim Ölçerin Avantajları:

Compared to rebar gauges based on steel strings or vibrating wires, OFSCN® Micro FBG Rebar Strain Gauge uses the measurement of the FBG inside the sensor as the standard for detecting rebar strain, stress, tension, ve displacement. It is not affected by environmental conditions such as haze, rain, snow, or obstructions. The measurements are accurate ve the response is fast (millisecond-level response).

Compared to various electrical signal rebar gauges based on steel strings or vibrating wires, OFSCN® Micro FBG Rebar Strain Gauge is based on optical fiber communication ve sensing. Therefore, it is not susceptible to electromagnetic interference ve can work in various strong ve weak electromagnetic environments.

In addition, the length of OFSCN® Micro FBG Rebar Strain Gauge can be customized. It can be used for short-length sampling measurements of rebar, as well as long-length overall measurements of rebar. It can monitor large strain values ve cover a wide range of rebar, thereby saving the number ve cost of sensors ve rebar gauges.

OFSCN® Micro FBG Rebar Strain Gauge is a digital, recordable, ve network-enabled sensor. It can be integrated into a FBG smart rebar sensing system, capable of monitoring various rebar information in large-scale buildings with large spaces, long distances, ve multiple targets. It has a wide spatial coverage range.