Accesorio de instalación - Accesorio de ingeniería de sensor FBG - Instalación de construcción de sensor de presión de desplazamiento de tensión FBG - Ejemplo
- Moneda: Aceptamos las siguientes monedas al comprar nuestros productos: USD, EUR, CNH, HKD, AUD, CAD, GBP, JPY, NZD, SGD. Las remesas T/T también admiten CHF; DKK; PLN; SEK; AED; THB. Para más monedas, consulte antes de la compra, puede haber sorpresas.
- Nombre de la marca: Default brand: OFSCN®. Unbranded products are available. Please consult for customized brand products (subject to local laws).
- Disponibilidad: Materiales en stock, producción personalizada posible.
This product is a supporting installation fixture for OFSCN® Red de Bragg en fibra (FBG) sensors, produced by DCYS. It is used for the installation and fixation of OFSCN® FBG strain sensors, FBG stress sensors, FBG displacement sensors, FBG Pipeline Pressure Sensor, and other products such as serially connected FBG temperature sensors. The fixture has the characteristics of small deformation, easy use and flexible installation. In addition to conventional screw installation, it can also be installed by welding, gluing(surface mounting), cable tie binding and clamps.
The welding y gluing installation methods for OFSCN® capillary series FBG sensors are not demonstrated here. The conventional screw installation method is described as follows:
1、Preparación y marcado de la superficie
Limpie a fondo la superficie de instalación. Coloque la placa de fijación larga en la superficie de instalación y marque los orificios en ambos extremos con un rotulador. Use un taladro para crear orificios en las posiciones marcadas e inserte tacos, luego aplánelos con un martillo.
Aplique adhesivo (este paso puede omitirse) en el área de contacto entre la placa de fijación larga y la superficie de instalación. Presione la placa de fijación larga sobre la superficie (asegurándose de que los orificios de la placa de fijación larga se alineen con los orificios de los tacos) y apriete los tornillos. Continúe con el siguiente paso una vez que el adhesivo haya curado.
2、Colocación y fijación de sensores FBG
 |
Position the tail handle of the OFSCN® capillary seamless steel tube FBG sensor in the semicircular groove of the long fixing plate, y press the semicircular groove of the short fixing plate onto the sensor's tail handle. Finally, secure them with screws, clamping the tail handle of the OFSCN® capillary seamless steel tube FBG sensor (on the side closer to the fiber core) between the two fixing plates
3、Instalación completada
 |
Repeat the same process to secure the Otros end of the OFSCN® capillary seamless steel tube FBG sensor to complete the installation.
4、Notas importantes durante la instalación
The OFSCN® capillary seamless steel tube FBG sensor usually has a certain pre-tension when it leaves the factory. Therefore, excessive pre-tension is not required during the installation process, but excessive pressure should also be avoided. Hence, it is important to straighten y secure the FBG sensor as much as possible during the installation process.
By following these steps, accurate measurement of physical quantities such as strain, stress, y temperature can be ensured for the OFSCN® capillary seamless steel tube FBG sensor at both ends.
OFSCN® series fiber optic Bragg grating strain sensor fixture customization y installation example:
 |
| OFSCN® Series Sensor de deformación FBG Gluing and Surface Mounting Installation Examples (Customized Fixtures) |
 |
| OFSCN® Series Sensor de deformación FBG Bolt-Fixed and Welded Installation Examples (Customized Fixtures) |
 |
| OFSCN® series Sensor de deformación FBG pipe clamp installation example (customized clamp), pipe longitudinal measurement |
 |
| OFSCN® series Sensor de deformación FBG pipeline strain installation example (custom fixture), pipeline annular strain, pressure measurement (01) |
 |
| OFSCN® series Sensor de deformación FBG pipeline strain installation example (custom fixture), pipeline annular strain, pressure measurement (02) |
DCYS is a professional manufacturer of FBG sensor installation y fixing fixtures, providing information such as the installation method, fixing method, Pipeline installation diagram of fixtures; the brand of fixtures as 'OFSCN'. Bulk purchase, better price!