Fiber Bragg Izgara Algılama Teknolojisi Ansiklopedisi - FBG SSS - FBG Sensör SSS - FBG Demodülatör SSS - FBG Yaygın Uygulama Sorun Analizi
Fiber Bragg Izgara (FBG) Sıcaklık Sensörü Deney Ⅰ - Çekme Kuvveti, Gerilim ve Zorlanmanın FBG Termometresi Üzerindeki Etkisi
In this article, we conducted a tensile experiment on OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensors (FBG thermometers). The experiment tested the temperature-wavelength relationship of the fiber Bragg grating (FBG) under different tensile conditions.
Through the experimental report ve error analysis, we demonstrated that OFSCN® Capillary Seamless Steel Tube temperature sensors (FBG thermometers) produced by OFSCN overcome the inherent drawbacks of FBG sensors (temperature ve strain/stress cross-sensitivity) ve exhibit accuracy ve high precision in practical use.
Başlıklı önceki bir makalede 'Geleneksel Fiber Bragg Izgara Sıcaklık Sensörlerinin (FBG Termometreler) Dezavantajları ve Kuvvet Analizi - Hatalı Sıcaklık Ölçümünün Nedenleri', we analyzed the three forces that the fiber Bragg grating (FBG) in traditional FBG sensors may experience. In the new OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensors (FBG thermometers), the FBG remains completely free from any external forces.
Bu noktayı kanıtlamak için ilk deneyi, 'Çekme Deneyi'ni gerçekleştiriyoruz. Aşağıda deney raporu ve veri analizi yer almaktadır:
 |
|
Şekil 1 |
|
|
| Şekil 2 |
Ⅰ. Deney Amacı
To verify that OFSCN® Capillary Seamless Steel Tube temperature sensors (FBG thermometers) produced by DCYS are minimally affected by external forces during construction ve use, ve that the fiber Bragg grating (FBG) inside the sensors does not experience stress or strain.
Ⅱ. Deney Ekipmanları
Fiber Bragg grating demodulator, OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer), tensile gauge, mercury thermometer, temperature-controlled chamber.
Ⅲ. Deney Yöntemi
In this experiment, an OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer) was connected to a fiber Bragg grating demodulator. The sensor was clamped ve fixed using a fixture near the fiber junction, ve a tensile gauge was attached to the rear end of the sensor using another fixture. The sensing part of the sensor, which includes the fiber Bragg grating (FBG), was placed inside the temperature-controlled chamber.
Under different tensile conditions, the fiber Bragg grating (FBG) wavelength in the OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG temperature sensor) was read using the fiber Bragg grating demodulator. The experiment was completed after comparison.
Ⅳ. Deney Prosedürü ve Veri Analizi
Since the wavelength of the fiber Bragg grating (FBG) is related to the ambient temperature ve the applied tensile force, the experimental procedure needed to consider temperature variations. The experiment first collected the temperature inside the temperature-controlled chamber, which fluctuated between 52.5 ve 53.1 degrees Celsius. At this temperature, the center wavelength of the NO.3 OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer) was recorded in its natural state, with a wavelength range of 1550258 to 1550272.
A tensile force of 50 Newtons was applied, ve after a 10-minute rest to eliminate the influence of manual operations, the center wavelength of the NO.3 OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer) was recorded, with a wavelength range of 1550264 to 1550274.
A tensile force of 100 Newtons was applied, ve after a 10-minute rest to eliminate the influence of manual operations, the center wavelength of the NO.3 OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer) was recorded, with a wavelength range of 1550263 to 1550278.
A tensile force of 150 Newtons was applied, ve after a 10-minute rest to eliminate the influence of manual operations, the center wavelength of the NO.3 OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensor (FBG thermometer) was recorded, with a wavelength range of 1550266 to 1550278.
Tüm deney veri analizi Şekil 1'de gösterilmektedir.
 |
|
Şekil 3 |
Ⅴ. Deney Sonucu
Based on the above experimental data, it can be concluded that OFSCN® Capillary Seamless Steel Tube Fiber Bragg Grating temperature sensors (fiber Bragg grating temperature sensors) produced by DCYS are minimally affected by external forces during construction ve use. Regardless of how the external tensile force changes, the force acts on the seamless steel tube used in the sensor, ve the fiber Bragg grating (FBG) inside the sensor does not experience stress or strain. This effectively solves the technical challenge of temperature ve strain/stress cross-sensitivity in traditional fiber Bragg grating sensors (FBG sensors).
Our philosophy is: 'OFSCN®, make optical fiber stronger!'
DCYS is a professional manufacturer of fiber bragg grating temperature sensors with accurate temperature measurement. It provides information such as test ve verification methods, verification experiments, ve test reports for accurate temperature measurement of FBG temperature sensors. The brand of FBG temperature sensors with accurate temperature measurement is 'OFSCN'.