Enciclopedia de tecnología de detección de rejilla de Bragg de fibra - Preguntas frecuentes sobre FBG - Preguntas frecuentes sobre sensores FBG - Preguntas frecuentes sobre demoduladores FBG - Análisis de problemas comunes de aplicación FBG

The OFSCN® fiber bagg grating strain sensor (FBG strain gauge) produced by DCYS is calibrated at the factory y comes with the basic strain coefficient y temperature coefficient (also known as calibration coefficient or calibration function) of the fiber bragg grating sensor. Below is a brief description of the calibration of the strain coefficient of the fiber bragg grating strain sensor with a range of 10,000 microstrains at the factory:

Catálogo:

1. Product Structure of OFSCN® Fiber Bragg Grating Strain Sensor (FBG Strain Gauge) with Large Range

OFSCN® fiber bragg grating strain sensor (FBG strain gauge) with a large range uses high elastic polymer material to encapsulate y protect the fiber bragg grating (FBG). This encapsulation belongs to the tubular type. The standard product diameter is 2.0 millimeters. The overall structure y product body are shown in Figure 1, 2, y 3 below:

Figure 1 - OFSCN® Fiber Bragg Grating Strain Sensor (FBG Strain Gauge) with Large Range - Physical Image - Length 15 cm

Figure 2 - OFSCN® Fiber Bragg Grating Strain Sensor (FBG Strain Gauge) with Large Range - Physical Image - Single-Ended Type Length 1 Meter

Figure 3 - OFSCN® Fiber Bragg Grating Strain Sensor (FBG Strain Gauge) with Large Range - Physical Image - Double-Ended Type Length 1 Meter

La junta se muestra en la Figura 4 a continuación:

Figura 4

Because the OFSCN® fiber bragg grating strain sensor (FBG strain gauge) uses a unique patented high elastic polymer tubular encapsulation structure y undergoes our special process treatment, it is easy to install, has a large range, high sensitivity, good accuracy, y small size, light weight, high tensile strength, high compressive strength, high temperature resistance, waterproof y moisture-proof.

2. Factory Test Report of OFSCN® Fiber Bragg Grating Strain Sensor (FBG Strain Gauge) with Large Range - Strain Coefficient Calibration Chart

High accuracy is the lifeline of DCYS's products. This feature can be verified from the test reports of every sensor that we produce, as shown in the figure below:

Figura 5

Figura 5 shows the measured curve of the strain coefficient (calibration coefficient, calibration function) of an actual OFSCN® fiber bragg grating strain sensor (FBG strain gauge) sold, which shows the correspondence between the sensor wavelength change and strain change. The experimental product structure used in the figure is shown in Figure 3 above, which is a double-ended type of serially connected fiber Bragg grating strain sensor with a length of 0.98 meters, prefabricated with 2000με (microstrain), calibrated to 5500με (microstrain).

From the material analysis, the OFSCN® fiber bragg grating strain sensor (FBG strain gauge) can also measure strain at high temperatures of 250 to 300 degrees Celsius, but due to time constraints, this experiment has not been conducted yet - it will be updated after the experiment is completed.

A diferencia del ejemplo mostrado en el diagrama, nuestro informe oficial de fábrica proporcionará valores específicos de longitud de onda y deformación. Teniendo en cuenta la necesidad de compensación de temperatura, también proporcionaremos el coeficiente de temperatura del sensor, y este coeficiente de calibración se puede utilizar directamente.

Our philosophy is: 'OFSCN®, make optical fiber stronger!'